Thermal imaging camera temperature detection multiple thermal imaging camera
Product Description
|
Specification |
| Product number | AI200 |
| Resolution | 800X1280 |
| Camera | 1 RGB camera |
| Display Screen | 8-inch IPS LCD screen |
| Brightness | 500 LU |
| Camera Sensor | 200W,1080P |
| Sensor | American thermal imaging sensor |
| Face Detection | Support simultaneous detection of 20 people |
| Protection Level | IP42 |
| Voltage | DC12V(±10%) |
| Over temperature alarm | Support |
| Wear a mask to identify | Support |
| Temperature measurement accuracy | ≤ ±0.3℃ within 2 meters, 3 meters to 4 meters ≤ ±0.4℃, 4m to 5m≤ ±0.5℃ |
| Wide dynamic | Support |
| Temperature measurement distance | 1 to 6 meters |
| Temperature range | 32℃~42.5℃ |
| Power consumption | 10W MAX |
| Equipment size | 250mm*170mm*200mm |
| Weight | About 4.5KG |
Parameter setting
You can set the high temperature threshold, temperature compensation value, switch-on time, record retention time, IP address, mask detection, open broadcast, language switching, system settings, volume adjustment and U disk upgrade.
- 1. High temperature threshold setting: Set the temperature measurement threshold, and voice alarm when the temperature exceeds the temperature.
- 2. Temperature compensation value: manually set the test body temperature for calibration.
- 3. Breaker opening time: the time interval between the opening and closing of the relay.
- 4. Record preservation time: store the test data (support 0-3000 days, fill in -1 for permanent preservation).
- 5. Server IP: The IP address of the server connected to the device
- 6. Turn on broadcast: Turn on, voice broadcast will be performed during detection, and none when turned off.
- 7. Language switching: the system language can be switched.
- 8. System setting: Jump to the system setting interface.
- 9. Volume setting: adjust the volume level.
Hot Selling
 |
||
 |
 |
 |
 |
 |
 |
 |
 |
 |
Avis
Il n’y a pas encore d’avis.