Remove the battery compartment cover (2+1).
Put a 9V alkaline battery in the battery compartment.
Insert the cable into the slot of the control box.
Insert the rubber nose clip into the nostrils, making sure that the two micro-light sources on the top enter the nose 1 to 1.5 cm.
Press the start button.
The green light should illuminate continuously instead of flashing.
A flashing light indicates an operational failure (low battery or cable is not properly inserted into the control box).
The green light automatically turns off after the treatment. (15 minutes and a half).
How to use this product:
(1) Open the battery cover and press the +, – pole to install the 9V alkaline battery (if the battery voltage is too low, please
replace the battery).
(2) Connect the laser wire and put the laser head into the nasal cavity.
(3) Press the ON/OFF button, the indicator light is on, and the laser hair is red, indicating that the instrument is in normal
operation;
(4) The instrument sets the working time to 15.5 minutes, and automatically shuts down when it arrives.
1 * Rhinitis Relief Treatment Machine
1 * Sensor Cable (connected with laser head)
Avis
Il n’y a pas encore d’avis.