1.It is compatible with most of Citroen and for Peugeot cars from 1995.
2. It supports read identification, read fault codes, clear fault codes, auto-scan etc. New version supports for Peugeot 307.
Latest Version Lexia 3 PP2000 For Citroen And For Peugeot
2.It is compatible with most Peugeot cars from 1995..If you have the two types of cars, please pay attention, please check with us first before purchase.
3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
1. Update: By CD
2. Support Multi-Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish,
Italian, Hungary, Greek, Czech
3. It works for both for Citroen and for Peugeot. Now support for Peugeot 307!
4. Version: for Lexia3 V48, for PP2000 V25, for Diagbox V7.835. Lexia-3 PCB edge is golden with full chips.Double PCB has 2pcs
optocouplers, which are new.
6. lexia-3 relays are 12pcs, which are 4.5V, it is more stable.
Software requires at least Intel Celeron / Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2 / 2000 / XP with the latest service pack installed.
Please setup the software according to the requirements to hardware and software. Otherwise it will fail to setup and bring you much trouble.
Better to install the software on the computer with Windows XP system.
Better to close the Anti-virus software on your computer. Because the Anti-virus may recognize it as a type of virus, it will
clear off all the software on the CD.
Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
1.Read Identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc…
2. Read Fault Codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).
Program supports report printing or imitate to clipboard.
3. Clear Fault Codes
this function clears all stored fault codes and other diagnostic information.
4. Auto-Scan (Complete Car Scan/Test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator Test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
|
What are the Similarities and Differences of the PP2000 Series on PCB and Apperance?
|
||||||||
|
PP2000 Lite
|
PP2000
|
PP2000 Plus
|
PP2000 Full
|
|||||
|
Firmware
|
Firmware
|
921815C
|
963830B
|
921815C
|
||||
|
Main IC
|
Main IC
|
Japan IC
|
Japan IC
|
Japan IC
|
||||
|
PCB Edge
|
PCB Edge
|
Golden edge
|
Golden edge
|
Golden edge
|
||||
|
Relay
|
12 pcs NEC Relay
|
12 pcs domestic Relay
|
12 pcs NEC Relay
|
12 pcs NEC Relay
|
||||
|
Optocoupler
|
2pcs Optocoupler
|
2pcs Optocoupler
|
2pcs Optocoupler
|
7pcs Optocoupler
|
||||
|
Varistor
|
With Varistor
|
Without Varistor
|
Without Varistor
|
With Varistor
|
||||
|
Packing List
|
Packing List
|
1pc x Improved Main unit with extension OBD2 cable
1pc x Long USB cable 1pc x CD |
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable 1pc x Short 9pin to USB cable 1pc x OBD2 cable 1pc x 16pin to Clip Cable 1pc x CD |
1pc x Improved Main unit with extension OBD2 cable1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable 1pc x OBD2 cable 1pc x 16pin to Clip Cable 1pc x CD |
||||
العربية
简体中文
Nederlands
English
Français
Deutsch
Italiano
Português
Русский
Español
Avis
Il n’y a pas encore d’avis.